ID Badges & Cards - Understanding Printing Technology
ID Badge as well as Card Printers are simple to utilize tools, which compare well with consumer printers in their ability to be used straight out of the box. However, as the majority of card printers function quite in different ways from ink-jet as well as laser printers, it's worth comprehending a bit about their technology Canadian Passport Photos
Dye Sublimation
Dye sublimation or dye-sub, is one of the most common modern technology used.Thermal printing is used to place layers of color into the ID badge surface area. In color sublimation printing, colors are not set as individual dots, as is done in inkjet printers. Dye sublimation makes pictures in particular appearance more sensible.
Inside a dye sublimation printer is a roll of transparent movie that appears like sheets of red, blue, yellow, and also grey colored cellophane stuck end to end. Installed in this movie are solid dyes representing the 4 standard colors utilized in printing: cyan, magenta, yellow as well as black. The print head heats up as it overlooks the movie, creating the dyes to vaporize and permeate the glossy surface area of the card prior to they go back to strong form. The evaporated colors permeate the surface of the card, developing a gentle gradation beside each pixel, rather than the noticeable border in between color and also card generated by inkjets. And also due to the fact that the shade instills the card, it is also much less prone to fading as well as distortion over time.
YMCKO
The printer produces the ID badges by putting layers of color in the complying with order:
Yellow: (Y).
Magenta: (M).
Cyan: (C).
Black: (K) or Resin black.
Clear: (O) or Topcoat.
The colored image is a combination of the Y, M, & C layers which likewise create a kind of black. The K Material layer enables very sharp defined black text, barcodes and so on to be added. The Topcoat layer works as a safety movie against wear and fading and can also carry a secure picture, which can not be copied - e.g. the Magicard Holokote protection watermark.
Reverse Transfer.
With reverse transfer, the printer prints on the opposite of a clear PVC re-transfer film, which is then laminated onto the ID Cards & Picture Badges [http://www.ultramagicard.com/applications/id/] This safeguards the picture from handling damages and also generates a brilliant edge-to-edge photo. The quality as well as toughness of the completed card is similar to that achieved by an off-set printing procedure however with the benefit that every card can be different.
Due to the fact that the re-transfer film is laminated onto the face of the card, it is possible to publish ideal to the side, unlike color sublimation printers which print practically to the edge leaving a little (much less than 0.5 mm) white boundary.
Lamination.
ID badge and also card lamination includes putting a clear layer of PVC over the card surface. Lamination is made use of to safeguard the card photo, especially where the card is on a regular basis swiped with a magnetic stripe viewers, where lamination will certainly allow 10,000's of swipes prior to any kind of visible wear of the picture occurs.
Comments
Post a Comment